Follow us on
[Your Basket]
[Mailing List]
Product Categories
Fuji W1 Accessories
Twin Camera Bar
Home Up Slik Twin Bar Slide Bars
About Us
Tech Support FAQ
Reel 3D Cross Ref
Order Info

Twin Camera Bar  Slik Bar    Interocular Bar Slide Bars  Vertical Mounts Slin Bar


LiteTwin Bar

This twinbar can accept up to 4 cameras, or two cameras and whatever may attach to a 1/4-20 screw thread post.  It can be attached to a tripod via an included reversible spigot with 1/4-20 or 3/8” female threads or alternatively a 3/8” or 5/8”light stand.  We also offer an accessory shoe if you would like to add a flash to it.  It is 16 inches long x 1 inch wide. 

133 LiteTwin 15 inch Twin Bar 39.95
133F Coldshoe for LiteTwin 9.95

Slintm (Slide/Twin) Bars for one or two camera stereo photography!

Our new "SLIN" bars work as a twin bar (for putting two cameras on) or a slide bar (used to move one camera with precision) for one camera stereo photography.  They have a tripod mount on the movable stage and will fit two cameras on.  Each has a tripod mount to attach it to a tripod and two 1/4-20 bolts to fit it on your camera or cameras!

The SLIN 6 has room for two cameras of around 3 inches width each or one camera of about 5 inches wide.  It has movement of around 5 inches and separation of around 3.  The 10 inch (Slin10) version has room for two cameras of about 5 inches wide and also a separation of around 8 1/2 inches.  They have graduations marked in cm with the center at 0 for the larger bar.

Twin6.jpg (319763 bytes)twin10.jpg (269737 bytes)

Slin6 Sliding twin bar 6" 22.95
Slin10 Sliding twin bar 10" 39.95


6 inch Twin Bar

130S.jpg (232912 bytes)



Great for small digital Cameras

Similar to the twin bar above the 6 inch twin bar is great for use with our Lanc Shepherd and small digital cameras.  In order to be more streamlined we eliminated the knobs and replaced them with fittings which work with an Allen Wrench (included).

130S 6" Twin camera mount 69.95

Slik Twin Camera Bar

For two camera use in stereo photography.  This bar has spring loaded camera post which can be adjusted with the locking collar to insure a consistent amount length of thread into your cameras tripod socket.  We recommend for most stereo photography applications that the middle 1/4 x 20 mounting socket be used for attachment to the tripod.  Includes a felt carrying bag!  Length is 12.5 inches (317mm), weighs just 18 oz. (500g).  For separations of around 3 to 10.5 inches.  More Information.

SLIK Slik Twin Camera Bar $139.95



Interocular Bar - For Spatial Control

All mounts adapt to this bar and can give you an adjustable interocular separation of a maximum of 7.5" (19.05 cm) after your cameras have been mounted on the vertical brackets. The Interocular Bar is 12" (30.48 cm) long, 1.750" (4.45 cm) wide and .375" (0.95 cm) thick and is sold separately. Has standard tripod mounting hole for mounting to your tripod!

126 Interocular Bar 69.95


[ Order ] 

Berezin Stereo Photography Products 21686 Abedul,  Mission Viejo, CA 92691 USA  (949) 215-1556 or 1554 We accept PayPal! 

Please contact us with questions or comments about this web site. All content, unless otherwise noted ©2021  Berezin Stereo Photography Products